Nullam dignissim, ante scelerisque the is euismod fermentum odio sem semper the is erat, a feugiat leo urna eget eros. Duis Aenean a imperdiet risus.

Get A Quote

Cast Steel Globe Valve

Flow-Tek High Pressure Globe Valve offer high performance, reliability and safety. The Globe Valve are especially suitable for high pressure and high temperature application in steam, oil and gas processing, power industries, in chemical and petrochemical industries.

Request A Quote Download Catalogue
  • Description

Flow-Tek can offer a series of Globe Valve are heavy duty Outside Screwed & Yoke Type bolted bonnet, rising stem with hand wheel. Globe valves are highly efficient for services requiring frequent operation and throttling. The internal passage within the valve diverts flow through 90o changes of direction resulting in pressure drop and turbulence. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights, Globe Valves are generally where moderate control or regulation of flow is required. All the valves are manufacturing as per international Design and standards to get the Total Interchangeable, Finest Quality and Workmanship.

Valve Operation

Operator Size Range
Hand wheel 2" - 10" - Class 150, 300, 600
2" - 4" - Class 900 & 1500
Gear Operator 12" & Above - Class 150, 300, 600
6" & Above - Class 900,1500

Material

STRUCTURE End Connection Flanged End Raised Face, Butt Weld End, RTJ,. ETC
MATERIAL Operation Hand wheel, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic
Shell WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu,Hastelloy, Inconel, Duplex Stainless Steel
Trim 13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel

Features

Flow-Tek offer Gate Valve with Pneumatic / Electrically (Motorized) / Gear Operation with Limit Switches and suit specific requirements.

Extended Bonnets with sufficient gas column length, usually specified by customer, are supplied for all valves to keep stem packing at sufficient distance away from the cold fluid to remain functional.

  • Double flanged / butt weld end, outside crew rising stem, yoke type bonnet.
  • Back seating bush arrangement to enable repacking under pressure.
  • Rigid and sturdy design.
  • Low pressure loss across the valve.
  • Long service life and leak tightness.
APPLICABLE STANDARDS:
STEEL GATE VALVES: API 600 / API 6D
STEEL GATE VALVES: BS 5155
STEEL GATE VALVES: ANSI B 16.34
FACE TO FACE: ANSI B 16.10
END DRILLED: ANSI B 16.5
BUTT WELD END: ANSI B 16.25
INSPECTION AND TEST: API 598 / API 6D
IBR APPROVED
DESIGN DESCRIPTION
FULL PORT DESIGN
OS & Y OUTSIDE SCREWED AND YOKE
BB, BOLTED BONNET
FLEXIBLE WEDGE FULLY GUIDED
CHOICE OF SOLID
RENEWABLE SEAT RINGS
FORGED T-HEAD STEM
RISING STEM AND NON-RISING HANDWHEEL
FLANGED OR BUTT WELD ENDS
AVAILABLE WITH BG OPERATOR

Applicable Standard

Design Standard API 600/BS1414
Testing Standard API 598/BS EN 12266-1
Face To Face ASME B 16.10
End Connection Flanged End - ASME B 16.5,Butt Weld End - ASME B 16.25
Pressure - Temperature Chart ASME B 16.34

Testing Standard

Note :

Valves can be supplied with actuator, pad lock and other accessories like limit switch, position indicator, solenoid valve as per requirement.

Stem extension, underground service features are available.
TEST TYPE TEST PRESSURE
    CLASS 150 CLASS 300 CLASS 600 CLASS 800 CLASS 1500
HYDRO SHELL Kg/Cm2 30 76 150 210 396
  Psig 425 1080 2130 2960 5625
HYDRO SEAT Kg/Cm2 22 55 110 153 291
  Psig 310 780 1560 2170 4125
AIR TEST Kg/Cm2   6.0   4 TO 7 4 TO 6
  Psig   80   60 TO 100

Applications

  • Oil refineries.
  • Water, steam, air, gas and liquids having corrosive properties.
  • Suitable for wide range of working conditions of pressure and temperature ratings.