Nullam dignissim, ante scelerisque the is euismod fermentum odio sem semper the is erat, a feugiat leo urna eget eros. Duis Aenean a imperdiet risus.

Get A Quote

Forged Steel Globe Valve

Flow-Tek High Pressure Globe Valve offer high performance, reliability and safety. The Globe Valve are especially suitable for high pressure and high temperature application in steam, oil and gas processing, power industries, in chemical and petrochemical industries.

Request A Quote Download Catalogue
  • Description

Flow-Tek can offer a series of Globe Valve are heavy duty Outside Screwed & Yoke Type bolted bonnet, rising stem with hand wheel. Globe valves are highly efficient for services requiring frequent operation and throttling. The internal passage within the valve diverts flow through 90o changes of direction resulting in pressure drop and turbulence. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights, Globe Valves are generally where moderate control or regulation of flow is required. All the valves are manufacturing as per international Design and standards to get the Total Interchangeable, Finest Quality and Workmanship.

Nomenclatur

SR. NO. PARTS NAME QTY.
1 BODY  
2 BONNET  
3 SEAT RING  
4 DISC  
5 DISC NUT  
6 SPINDLE  
7 GLANDE NUT  
8 BACK SHEET BUSH  
9 GLAND FLANGE  
10 GASKET  
11 GLANDE PACKING  
12 BONNET WHEEL  
13 HAND WHEEL  
14 BOLTS & NUT

Features

Flow-Tek" offer Globe Valve equipped with Pneumatic Actuator, Electrically (Motorised) Actuator, Pneumatic Cylinder Operation along with accessories like solenoid, Limit Switches, Manual Override in Two Way & Three Way Design to get an extra edge for your specific application.

Extended Bonnets with sufficient gas column length, usually specified by customer, are supplied for all valves to keep stem packing at sufficient distance away from the cold fluid to remain functional.

  • Outside screw and yoke type bolted bonnet construction.
  • Rigid and sturdy design.
  • Long service life with leak tightness.
  • Back seating surfaces provided integral to bonnet.
  • Ends - socket weld able / screwed.

Material

STRUCTURE End Connection Flanged End Raised Face, Butt Weld End, RTJ,. ETC
MATERIAL Operation Hand wheel, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic
Shell WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu,Hastelloy, Inconel, Duplex Stainless Steel
Trim 13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel

Testing Standard

Note :

Valves can be supplied with actuator, pad lock and other accessories like limit switch, position indicator, and solenoid valve as per requirement.

Stem extension, underground service features are available.
TEST TYPE TEST PRESSURE
    CLASS 150 CLASS 300 CLASS 600 CLASS 800 CLASS 1500
HYDRO SHELL Kg/Cm2 30 76 150 210 396
  Psig 425 1080 2130 2960 5625
HYDRO SEAT Kg/Cm2 22 55 110 153 291
  Psig 310 780 1560 2170 4125
AIR TEST Kg/Cm2   6.0   4 TO 7 4 TO 6
  Psig   80   60 TO 100

Applications

  • Refineries and petrochemical Industries.
  • Fertilizer Plant.
  • Thermal Power Plant.
  • Other Process Industries.