CAST STEEL GLOBE VALVE
CAST STEEL GLOBE VALVE
Flow-TekHigh Pressure Globe Valve offer high performance, reliability and safety. The Globe Valve are especially suitable for high pressure and high temperature application in steam, oil and gas processing, power industries, in chemical and petrochemical industries.
"Flow-Tek" can offer a series of Globe Valve are heavy duty Outside Screwed & Yoke Type bolted bonnet, rising stem with hand wheel. Globe valves are highly efficient for services requiring frequent operation and throttling. The internal passage within the valve diverts flow through 90o changes of direction resulting in pressure drop and turbulence. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights, Globe Valves are generally where moderate control or regulation of flow is required.
All the valves are manufacturing as per international Design and standards to get the Total Interchangeable, Finest Quality and Workmanship.
VALVE OPERATION:
| Operator | Size Range |
|---|---|
| Hand wheel | 2" - 10" - Class 150, 300 |
| 2" - 6 " - Class 600 | |
| 2" - 4 " - Class 900, 1500 | |
| Gear Operator | 12" & Above - Class 150 & 300 |
| 8" & Above - Class 600 | |
| 12" & Above - Class 900 & 1500 |
MATERIAL:
| STRUCTURE | End Connection | Flanged End Raised Face, Butt Weld End, RTJ,. ETC |
|---|---|---|
| Operation | Hand wheel, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic | |
| MATERIAL | Shell | WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu,Hastelloy, Inconel, Duplex Stainless Steel |
| Trim | 13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel |
"Flow-Tek" offer Globe Valve equipped with Pneumatic Actuator, Electrically (Motorised) Actuator, Pneumatic Cylinder Operation along with accessories like solenoid, Limit Switches, Manual Override in Two Way & Three Way Design to get an extra edge for your specific application.
Extended Bonnets with sufficient gas column length, usually specified by customer, are supplied for all valves to keep stem packing at sufficient distance away from the cold fluid to remain functional.
- Double flanged / butt weld end, outside screw rising stem, yoke type bonnet
- Back seating bush arrangement to enable repacking under pressure
- Rigid and sturdy design
- Long service life
| APPLICABLE STANDARDS: |
|---|
| STEEL GLOBE VALVES: API 600 / API 6D |
| STEEL GLOBE VALVES: BS 1873 / DIN STD. |
| STEEL GLOBE VALVES: ANSI B 16.34 |
| FACE TO FACE: ANSI B 16.10 / DIN STD. |
| END DRILLED: ANSI B 16.5 |
| BUTT WELD END: ANSI B 16.25 |
| INSPECTION AND TEST: API 598 / API 6D |
| IBR APPROVED |
| DESIGN DESCRIPTION; |
|---|
| STRAIGHT PATTERN BODY DESIGN |
| OS & Y OUTSIDE SCREWED AND YOKE |
| BB, BOLTED BONNET, YOKE INTEGRAL WITH BONNET |
| RISING STEM AND HANDWHEEL |
| LOOSE DISC, PLUG |
| RENEWABLE SEAT RING |
| HORIZONTAL SERVICE |
| FLANGED OR BUTT WELD ENDS |
| AVAILABLE WITH BG OPERATOR |
APPLICABLE STANDARD:
| Design Standard | BS 1873 |
|---|---|
| Testing Standard | BS EN 12266 - 1 |
| Face To Face | ASME B 16.10 |
| End Connection | Flanged End - ASME B 16.5,Butt Weld End - ASME B 16.25 |
| Pressure - Temperature Chart | ASME B 16.34 |
TESTING STANDARD:
| TEST TYPE | TEST PRESSURE | |||||
|---|---|---|---|---|---|---|
| CLASS 150 | CLASS 300 | CLASS 600 | CLASS 800 | CLASS 1500 | ||
| HYDRO SHELL | Kg/Cm2 | 30 | 76 | 150 | 210 | 396 |
| Psig | 425 | 1080 | 2130 | 2960 | 5625 | |
| HYDRO SEAT | Kg/Cm2 | 22 | 55 | 110 | 153 | 291 |
| Psig | 310 | 780 | 1560 | 2170 | 4125 | |
| AIR TEST | Kg/Cm2 | 6.0 | 4 TO 7 | 4 TO 6 | ||
| Psig | 80 | 60 TO 100 | ||||
- Valves can be supplied with actuator, pad lock and other accessories like limit switch, position indicator, and solenoid valve as per requirement.
- Stem extension, underground service features are available.
- Oil refineries.
- Water, steam, air, gas and liquids having corrosive properties.
- Suitable for wide range of working conditions of pressures and temperature ratings.
