CENTER DISC BUTTERFLY VALVE
CENTER DISC BUTTERFLY VALVE
"Flow-Tek" The valve was developed to provide reliable sealing in water and air lines, and is today the industry benchmark.
The most striking feature of Aqua seal Butterfly Valve is its integrally-molded body liner. FLOWTEK's elastomer body seat is vulcanized insitu onto the body using high temperature and pressure, and this provides longer life and superior performance when compared to valves with loose liners.
Aquaseal requires no maintenance, and is truly a fit-and-forget valve.
- Longer Life
- Tight Sealing, and Consistent Low Torque
- Assured Shaft Sealing
- Lower Resistance to Flow - Disc design
- Ease of Installation
- One-piece blowout-proof Shaft
- Reliable Drive
- Size Range 50 to 600 mm
- Pressure Ratings PN10, PN16
- End Connection To suit ANSI # 125/ 150
| MATERIAL | TEMPERATURE RATINGS OC (OF) |
|---|---|
| EPDM (2" - 16") | -34 To 107 (-30 to 225) |
| EPDM (18" & Larger) | -34 To 107 (-30 to 225) |
| PTFE | 4 To 121 (40 to 250) |
| BUNA - N | -12 to 82 (10 to 180) |
| NEOPRENE | -6 to 93 (20 to 200) |
| HYPALON | -17 to 135 (0 to 275) |
| VITON | -12 to 135 (10 to 275) |
| HIGH TEMPERATURE (VITON) | -12 to 204 (10 to 400) |
OPERATION:
Lever / Gear / Pneumatic Actuator / Pneumatic Cylinder / Electrical (Motorized) Actuator / Manual Override Arrangement with Pneumatic & Electrical Actuator.
APPLICABLE STANDARD:
| Design Standard : | BS 5155 / API 609 / IS 13095 |
|---|---|
| Face to Face : | BS 5155 / API 609 / IS 13095 (Wafer Short) |
| End Connection : | Wafer Type / Lug Type / Flanged End to suit ANSI / DIN / BS / JIS / IS etc. |
| Testing Standard : | BS 5155 / BS 6755 (Part I) / API 598 / IS 13095 |
SEAT TEMPERATURE RATINGS: (For Resilient Seated Butterfly Valves)
| MATERIAL | TEMPERATURE RATINGS OC (OF) |
|---|---|
| EPDM (2" - 16") | -34 To 107 (-30 to 225) |
| EPDM (18" & Larger) | -34 To 107 (-30 to 225) |
| PTFE | 4 To 121 (40 to 250) |
| BUNA - N | -12 to 82 (10 to 180) |
| NEOPRENE | -6 to 93 (20 to 200) |
| HYPALON | -17 to 135 (0 to 275) |
| VITON | -12 to 135 (10 to 275) |
| HIGH TEMPERATURE (VITON) | -12 to 204 (10 to 400) |
- Water works.
- Power plants.
- Sewage plants.
- Process industries.
- Chemical and petrochemical plants.
